Homepage | Site Index | Contact Us | Feedback  

  
 
news communications electric generation water board
 

How-To Procedures for Using the BMU Network

1: How to set up an E-mail Account in Outlook Express

2: How to configure Windows 95/98 for TCP/IP on the BMU Network

3: How to turn off "File and Print Sharing" in Windows 95/98

4: How to disable Dial-Up Networking when using a Cable Modem




1: How to set up an E-mail Account in Outlook Express

  • Start Outlook Express (Start-->Programs-->Outlook Express)
  • Select Tools then Accounts


  • Click Add then Mail


  • Enter your full name (for example: John Doe)


  • Enter your full e-mail address assigned to you as in the example below


  • Select POP3 and enter mail.cityofbryan.net for both servers as shown below


  • Enter your e-mail username and password


  • Enter a name to call this account.  


  • Select Connect using my local area network (LAN)


  • Click to Finish and return you to the following screen




2: How to configure Windows 95/98 for TCP/IP on the BMU Network

  • Go to the Control Panel (Start-->Settings-->Control Panel)
  • Click on Network


  • Select TCP/IP->Your Network Adapter.  If you use a USB port for your network connection, select TCP->That USB Adapter.


  • Select the IP Address tab.  
  • Select Obtain an IP address automatically


  • Select the Gateway tab
  • Remove any installed gateways if they exist


  • Select the DNS Configuration tab
  • Select Disable DNS


  • Click OK and close out of the Network windows
  • Reboot the PC



3: How to turn off "File and Print Sharing" in Windows 95/98

  • Go to the Control Panel (Start-->Settings-->Control Panel)
  • Click on Network


  • Click on File and Print Sharing


  • If File and Print Sharing is allowed, both boxes will be checked


  • Uncheck the boxes to prohibit others from looking at your files


  • Click OK and close out of the Network windows
  • Reboot the PC



4: How to disable Dial-Up Networking when using a Cable Modem

  • Go to the Control Panel (Start-->Settings-->Control Panel)
  • Click on Internet


  • Click on the Connection tab
  • Select Connect to the Internet using a local area network


  • Click OK
  • Note: If Outlook Express is trying to use a dial-up connection, see the "How-To" for setting up an e-mail account in Outlook Express.  Make sure that each e-mail account is configured to Connect using my local area network (LAN)

     Homepage | Site Index | Contact Us | Feedback  
   Bryan Municipal Utilities    841 E. Edgerton St., Bryan, Ohio 43506
   Tel: 419.633.6100    Last modified:  4/21/2008 1:35:36 AM    Copyright 2008